Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this answer should be reported.
The Classification Of CNC Machine Tools There are many classification methods for CNC machine tools, which can be roughly classified according to the type of machine tool structure, control method, china cnc machining movement method, and machine tool processing method. ...
Cutting Vibration How To Control Vibration During Cutting During CNC Machining?Cutting vibration usually occurs in turning of slender shafts, turning of thin-walled parts, etc. Once the vibration intensifies, there will be intense vibration with an amplitude exceeding several tens of ...
General Rule Of Knife Path Rough opening: Under the maximum load of the machine tool, in most cases, the largest possible knife, the largest possible feed amount, and the fastest possible feed should be used. In the case of the ...
The 8000mm extra large tubesheet metal forging has large diameter and heavy weight, which exceeds the production capacity of 185mn oil press. It is very difficult to adopt integral forming, so it can only be formed in sections. In the ...
There are still great differences between operating fdm3d printer and operating resin 3D printer. One is to use wound filament as consumables and the other is to use liquid resin as consumables. With FDM printer, I believe novices can quickly ...
In the production process of the aluminum profile frame, in addition to welding the various interface parts, it is also necessary to do anti-corrosion treatment to the entire material, so as to effectively prolong the use time of the entire ...
Warpage (bending) The phenomenon that the stamped parts appear curved is called warpage (bend). The reason analysis and debugging methods are as follows; Due to the anisotropy of the material and the unleveling of the coil. It can be pressed ...
1. The cutting of the metal stamping parts is adapted to the contour of the local protrusion shape to make the material flow reasonably; 2. There should be enough laps between the cuts, so that the punch can tension the ...
1. The raw materials must conform to the specified technical conditions, strictly check the specifications and grades of the raw materials, and conduct laboratory inspections on the workpieces with high dimensional accuracy and surface quality requirements under conditions. 2. Make ...
1. Overshoot during operation will also affect the accuracy. It may be because the time of addition and subtraction is too short. Prolong the change time appropriately. Of course, it is also very likely that the link between the red ...
