- 1. Overshoot during operation will also affect the accuracy. It may be because the time of addition and subtraction is too short. Prolong the change time appropriately. Of course, it is also very likely that the link between the red bar and the servo motor is loose.
- 2. Because the roundness produced by the two-axis linkage is out of tolerance, the cnc machine is not adjusted properly to form a circular deformation, the red bar gap compensation of the shaft is not correct or the shaft positioning is offset, which may affect the accuracy of the precision hardware accessories.
- 3. The poor processing accuracy of the precision hardware parts is because the dynamic error between the shafts is not adjusted properly during installation, or because the changes caused by the wear of the shaft chain affect the precision of the precision hardware parts cnc machining. The accuracy deviation caused by this type of error can generally be solved by re-adjusting the compensation amount. However, if the error is too large and causes an alarm, the servo motor must be checked to see if the machine speed is too high.
What is the reason for the worsening precision of precision hardware accessories
Cnc Operating
