The principle of EDM is based on the electro-corrosion phenomenon of pulsed spark discharge between the tool and the workpiece (positive and negative electrodes) to remove excess metal to meet the predetermined processing requirements for the size, shape and surface ...
Discy Latest Questions
Swiss machine is one of the equipment of CNC lathe. The traditional CNC lathe is mainly based on the cutting mode, which is called the cutting machine. The product does not move in a single clamping position, and the product ...
When the machining center mills the steel plate, the steel plate vibrates. In order to avoid the vibration, the speed is increased or decreased. What does it have to do with down milling and up milling, how to avoid chatter ...
Does the tool compensation need to be added a little bit during the machining process? Can it be reduced; what tools are needed 80 lower for machining
A broaching machine is a machine tool that uses a broach as a tool to process through holes, planes and forming surfaces of workpieces. Broaching can obtain higher dimensional accuracy and smaller surface roughness, high productivity, and suitable for mass ...
The machining center is developed from the CNC milling machine. The biggest difference with the CNC milling machine is that the machining center has the ability to automatically exchange machining tools. By installing tools for different purposes in the tool ...
Everyone learns CNC lathes, what exactly is this for?
I saw PRM, SFM, and SMM in the book, but I don’t understand. It seems that they are all units. Any senior can help me explain in detail, thank you. These are used in machine numerical control.
The essence of pressure casting (referred to as die casting) is to fill the die-casting cavity with liquid or semi-liquid metal at a higher speed under high pressure, and form and solidify under pressure to obtain castings. Die casting features ...
Stamping is a forming method that relies on presses and dies to apply external force to plates, strips, pipes and profiles to cause plastic deformation or separation, so as to obtain workpieces (stamping parts) of the required shape and size. ...